Search for: All records

The latest generation of high-resolution spectrographs on 10m-class telescopes are designed to pursue challenging science cases. Consequently, ever more precise calibration methods are necessary to enable trail-blazing science methodology. We present the High-Resolution Infrared SPectrograph for Exoplanet Characterization (HISPEC) Calibration Unit (CAL), designed to facilitate challenging science cases such as Doppler imaging of exoplanet atmospheres, precision radial velocity, and high-contrast, high-resolution spectroscopy of nearby exoplanets. CAL builds on the heritage of the pathfinder instrument, the Keck Planet Imager and Characterizer (KPIC)1–3 and utilizes four near-infrared (NIR) light sources encoded with wavelength information that are coupled into singlemode fibers. They can be used synchronously during science observations or asynchronously during daytime calibrations. A uranium hollow cathode lamp (HCL) and a series of gas cells provide absolute calibration from 0.98 μm to 2.46 μm. Two laser frequency combs (LFC) provide stable, time-independent wavelength information during observation, and CAL implements two low-finesse Fabry-Perot etalons as a complement to the LFCs. 

Abstract We present an updated characterization of the TOI-1685 planetary system, which consists of aP_b= 0.69 day ultra-short-period super-Earth planet orbiting a nearby (d= 37.6 pc) M2.5V star (TIC 28900646, 2MASS J04342248+4302148). This planet was previously featured in two contemporaneous discovery papers, but the best-fit planet mass, radius, and bulk density values were discrepant, allowing it to be interpreted either as a hot, bare rock or a 50% H₂O/50% MgSiO₃water world. TOI-1685 b will be observed in three independent JWST Cycle 2 programs, two of which assume the planet is a water world, while the third assumes that it is a hot rocky planet. Here we include a refined stellar classification with a focus on addressing the host star’s metallicity, an updated planet radius measurement that includes two sectors of TESS data and multicolor photometry from a variety of ground-based facilities, and a more accurate dynamical mass measurement from a combined CARMENES, InfraRed Doppler, and MAROON-X radial velocity data set. We find that the star is very metal-rich ([Fe/H] ≃ +0.3) and that the planet is systematically smaller, lower mass, and higher density than initially reported, with new best-fit parameters ofR_pl= 1.468 ${}_{-0.051}^{+0.050}$R_⊕andM_pl= ${3.03}_{-0.32}^{+0.33}$M_⊕. These results fall in between the previously derived values and suggest that TOI-1685 b is a hot rocky planet with an Earth-like density (ρ_pl= 5.3 ± 0.8 g cm⁻³, or 0.96ρ_⊕), high equilibrium temperature (T_eq= 1062 ± 27 K), and negligible volatiles, rather than a water world. 

The Keck Planet Finder (KPF) is a fiber-fed, high-resolution, echelle spectrometer that specializes in the discovery and characterization of exoplanets using Doppler spectroscopy. In designing KPF, the guiding principles were high throughput to promote survey speed and access to faint targets, and high stability to keep uncalibrated systematic Doppler measurement errors below 30 cm s−1. KPF achieves optical illumination stability with a tip-tilt injection system, octagonal cross-section optical fibers, a double scrambler, and active fiber agitation. The optical bench and optics with integral mounts are made of Zerodur to provide thermo-mechanical stability. The spectrometer includes a slicer to reformat the optical input, green and red channels (445-600 nm and 600-870 nm), and achieves a resolving power of ∼97,000. Additional subsystems include a separate, medium-resolution UV spectrometer (383-402 nm) to record the Ca II H & K lines, an exposure meter for real-time flux monitoring, a solar feed for sunlight injection, and a calibration system with a laser frequency comb and etalon for wavelength calibration. KPF was installed and commissioned at the W. M. Keck Observatory in late 2022 and early 2023 and is now in regular use for scientific observations. This paper presents an overview of the as-built KPF instrument and its subsystems, design considerations, and initial on-sky performance. 

The Keck Planet Finder (KPF) is a fiber-fed, high-resolution, high-stability spectrometer in development at the UC Berkeley Space Sciences Laboratory for the W.M. Keck Observatory. KPF is designed to characterize exoplanets via Doppler spectroscopy with a goal of a single measurement precision of 0.3 m s-1 or better, however its resolution and stability will enable a wide variety of astrophysical pursuits. Here we provide post-preliminary design review design updates for several subsystems, including: the main spectrometer, the fabrication of the Zerodur optical bench; the data reduction pipeline; fiber agitator; fiber cable design; fiber scrambler; VPH testing results and the exposure meter.